操作说明

Configuring Position Trigger Outputs on NanoScan NPC-D-6000 Series Controllers

Position trigger outputs use the “step” output from the “step and direction” pair of digital outputs to create a digital pulse at a user defined interval as the stage completes a commanded positional move.

Queensgate 6000 Series Controller Application File Quick Guide

This guide provides a basic instruction for updating the “Application File” Firmware (.tgz file) on Queensgate 6000 series nanopositioning controllers using the NanoFlash application.

QGOP-RAISE-KIT-TI2 Installation Instructions

The procedure for installing the Prior Queensgate OP Series (OP200/OP400/OP800) objective positioners on the Nikon Ti2 inverted microscope using the QGOP-RAISE-KIT-TI2 adapters to increase the motorized stage height.

Nikon LSC for SP Series Installation Instructions

The installation procedure for the Prior Queensgate SP Series (SP200/SP400/SP600/SP800) on to a Nikon Ti ECLIPSE with the Nikon Laser Safety Cover (TI-TIRF-LSC).

NanoScan NPC-D-6110 NPC-D-6220 NPC-D-6330 User Manual

Closed loop digital servo controller for positioning of up to three Queensgate NanoMechanisms

NanoScan NPC-D-6xx0 Series Nanomechanism Controller Command Set

Description of control system and command set allowing configuration and control from customer software

NanoScan NPC-D Series – Nanomechanism Controller, Controller Interface Library

Application Programming Interface allowing configuration and control from customer software